Products
38 grades in total. Pick a family, then open any grade for features, technical data and recommended processes.
🔥 Soldering Flux （8）
No-clean, water-soluble, aluminium, stainless, pre-coating and HASL grades - all RoHS compliant.
F116 / F116R / F116T
Resin-Type No-Clean Flux
Medium-solids resin no-clean flux. Pale film, high gloss, very little fume - ideal for lines without extraction.
F101 / F101B / F101R
Water-Soluble Flux
High activity, fast wetting - even heavily oxidised terminations tin in one pass. Residue washes off with plain water.
F114 / F114B / F114C
General-Purpose Resin Flux
For hand iron and wave soldering; runs on low-cost S502/602 solder to cut manufacturing cost.
F117 / F117B / F119
Pre-Coating Flux
PCB pre-coating for oxidation protection and solderability. Very high activity; F119 is the low-solids grade for dense and multilayer boards.
F105 / F105A
High-Activity Aluminium Soldering Flux
Developed for aluminium-to-copper replacement in electrical work. Joins Al+Al, Al+Cu, Al+Fe/stainless, Al+Ni, Al+Zn and their alloys.
F107 / F107T / F107R
Stainless Steel Flux
Water-soluble flux for tinning stainless pins on connectors; even heavily oxidised areas tin in one pass, residue rinses off with water.
F005
High-Activity Flux (Electrical Grade)
The go-to grade for simple high-activity electrical work; typically paired with low-cost S502/602 wire.
F104A / F104B / F104C
HASL Solder Flux
Flux made for the PCB hot-air-solder-levelling (HASL) stage: high activity, easy-to-clean residue. F102 is the alternative grade.
🟠 Solder Paste （2）
Lead-free P3 series (incl. SnBi58 low-temp) and leaded P1 series - printability and solderability together.
P3 系列 / SnAg0.3Cu0.7 / SnBi58
Lead-Free Solder Paste P3 Series
Fine powder, good printability, slow to dry out, excellent solderability and very little residue. SnAg0.3Cu0.7 standard and SnBi58 low-temperature grades.
P1 系列 / P105-X / P105-T / Sn63 / Sn62Ag2
Leaded Solder Paste P1 Series
Bright, full fillets. P105-X prints continuously for 12h down to 0.3mm pitch; P105-T wets better and handles 0.2mm fine pitch.
🧵 Solder Bar & Wire （5）
Lead-free SnCu/SnAg/SnAgCu and leaded anti-oxidation grades, φ0.1-7mm, special alloys to order.
S157 / SnCu0.7
SnCu Lead-Free Solder Bar
Premium low-cost SnCu bar for wave soldering and tinning. With F118E/P it delivers quality close to leaded Sn63.
S105 / S105(kk)
Leaded Anti-Oxidation Solder Bar
High-temperature anti-oxidation SnPb bar made for tinning. Very low fume, no pungent smell, no-clean for general consumer electronics.
S154 / S156 / S25x / S35x / S45x
Lead-Free Activated Solder Wire
General and special lead-free activated wire, φ0.1-7mm, in Sn-Cu, Sn-Ag, Sn-Ag-Cu, Sn-Ag-Cu-Sb plus ultrafine grades.
S202 / S204(nc) / S206(w) / S302 / S402 / S502 / S602 / S704 / S902
Leaded Solder Wire
Full range from premium general-purpose to ultra-low-cost, solid or resin-cored (RMA / no-clean R / water-soluble W), including loudspeaker and consumer-electronics grades.
纯锡 / 纯铅 / 纯锌 / 锡铅阳极
High-Purity Plating Anode Materials
Pure tin, lead, zinc and SnPb anodes as plate, rod or ball, made to your dimensions, purity 99%-99.999%.
🧴 Surface Cleaning Agents （7）
PCBA cleaner, economy cleaner, wiping solvent, white spirit, mesh wash & retarder, aqueous wash additive.
W118 / MC101
W118 PCBA Cleaner (No-Clean Residue Remover)
CFC-free and formulated to EU RoHS. Colourless, virtually odourless, and it shifts the residue of virtually every mainstream leaded and lead-free flux.
W-18T / MC101
Economy Grade PCBA Cleaner
Budget cleaner for lines where low odour is not critical; still shifts ordinary rosin-flux residue.
抹机水
Wiping Solvent (Machine Wipe)
Fast-evaporating wiping solvent for plant, jigs and part surfaces; leaves no water marks.
白电油
Industrial Cleaning Solvent (White Spirit Type)
General-purpose industrial cleaning solvent for degreasing, wiping and thinning; SGS/CTI test data available.
丝印洗网水
Screen Printing Mesh Wash
Mesh cleaner for screen printing: strong solvency, safe on stencil emulsion and mesh, shifts dried ink fast.
丝印油墨慢干水（783）
Screen Ink Retarder (783)
Retarder that slows ink drying on the screen, preventing clogging and broken lines for steadier printing.
电子器件水洗添加剂
Electronic Component Aqueous Wash Additive
Water-based wash additive that boosts removal of water-soluble flux residue and ionic contamination while cutting solvent use.
🧪 Paint & Enamel Strippers （7）
Immersion, brush, plastic-safe and magnet-wire strippers plus universal powder - from room temp up to 220C class enamel.
CC-1
Immersion Type Paint Stripper
General immersion stripper for the coatings trade: shifts alkyd, nitro, amino, acrylic and epoxy films, and clears paint from plastic parts.
CC-2 / CC-2B
Fast Immersion Paint Stripper
Built for high-strength epoxy, powder-coat and e-coat finishes; fast acting and will strip PCB solder mask right off.
CC-2X
Plastic-Safe Stripper / Ink Remover
Made to lift paint and screen-printed markings off plastic parts without attacking the substrate.
CC-3A / CC-3B / CC-3E
Brush-Type Fast Paint Stripper
For spot stripping and repair - large parts that cannot be immersed, and localised PCB solder-mask removal.
CC-4B / CC-4T / CC-4A
Enamelled-Wire Fast Stripper
Made for localised stripping of magnet wire - shifts most enamel films in 0.5-2 min and still works above 0C in winter.
CC-4P / CC-4PT
Universal Enamelled-Wire Stripping Powder
Shifts every type of high-temperature magnet-wire enamel with no grade selectivity, and markedly improves core solderability afterwards - especially valuable on aluminium wire.
CC-4K / CC-4T / CC-4X / CC-4M
High-Temperature Magnet-Wire Stripper Series
Designed for high temperature-class magnet wire: strips at room temperature, CC-4X goes up to 220C class, CC-4M is for automatic lines.
⚙️ Dross Reducer & Auxiliaries （4）
Online dross reducer, flux thinner, wire activator, plus analysis and process diagnostic services.
HS-1A / HS-2
Online Dross Reducing Agent
Used in the pot: cuts dross down to 50-30% of normal levels, saving solder and reducing skimming frequency.
助焊剂专用稀释剂
用于调节助焊剂固体含量与粘度，适配不同涂布方式与工艺窗口，不改变原有焊剂的活性体系。
Adjusts flux solids and viscosity for different application methods without disturbing the flux activity system.
焊丝活化剂 / 焊剂中间体
焊剂中间体系列，供焊丝生产与助焊剂调配使用，含焊丝用活化剂与焊剂中间体专卖料。
供焊锡丝生产用的活化剂，决定焊丝内芯的活性与发泡、飞溅表现。 焊剂中间体系列用于自配助焊剂，可按目标活性与固体含量组合。 可实现低飞溅、低烟、免清洗等差异化性能。 提供新型焊丝用焊剂专卖料与焊剂活化剂专卖料。 配套：助焊剂专用稀释剂、各型免清洗与树脂型焊剂基料。 具体配方与添加量按客户工艺沟通确定，可提供小样试配与工艺支持。
分析测试与工艺诊断服务
面向制造企业提供焊接、清洗、表面处理工艺优化方案；面向科研部门提供分析测试、未知物剖析、可靠性与失效分析。
面向制造型企业提供优化制造工艺的整体解决方案。 面向基础科学研究部门提供分析测试、未知物剖析等项目。 提供可靠性分析、失效分析服务。 焊接工艺综合诊断：从焊料、焊剂、温度曲线到清洗环节找出良率瓶颈。 可按客户实际工艺特点开发专用型焊剂、专用去漆剂与专用表面处理剂。 提供材料 SGS / CTI 环保测试资料配套。 投诉专线 ceo@cnofc.net，技术支持 QQ 409386743。
✨ Plating Additives & Surface Treatment （3）
3rd-gen wide-temp low-chrome chrome additive, Zn/Sn brighteners, degreasers, etchants, phosphating and passivation.
TCR-21 / TCR-21A
3rd-Gen Wide-Temperature Low-Chrome Plating Additive
Fast strike, best throwing and covering power. Runs at 5-60C with no sulphate addition, so the usual low-chrome sulphate control problem disappears.
TCR-1 / TCR-22
TCR Series Chrome Additives (Other Grades)
The TCR range also includes TCR-1 and TCR-22 for different chromic acid levels and deposition rates, documented in the TCR user guide.
碱性镀锌添加剂
Alkaline Zinc Plating Additive
Brightener and carrier for alkaline zinc baths, giving strong coverage and a fine, uniform deposit.
No match. Try a shorter keyword.